Overview
ICE-9NKY-RJA
ICE-9NKY-M12A
Product Operation
Automatic Backup and Restore
Automatic Backup Settings
1.
Please ensure that “Auto Mode” is turned on
before using the automatic backup or restore
functions. To enable these functions, log into the
switch web console and navigate to Switch >
Tools > N-Key, then select “Auto Mode”.
2. To backup the switch configuration automatically,
simply plug the ICE-9NKY series device into a
console port after the Advantech switches are
powered on*.
3. While the ICE-9NKY series device is backing up
the switch configuration, the system LED will
blink slowly. The backup process may take 1 ~ 2
minutes to complete.
4. When the system LED stops blinking, the
ICE-9NKEY series device can be removed from
the switch. The configuration data will now be in
N-Key.
*Wait until the system LED stops blinking
Automatic Restore Settings
1. Please ensure that “Auto Mode” is turned on
before using the automatic backup or restore
functions. To enable these functions, log into the
switch web console and navigate to Switch > Tools
> N-Key, then select “Auto Mode”.
2. To restore the switch configuration automatically,
simply power off the switch and plug the
ICE-9NKY series device into console port, then
power on the switch.
3. The ICE-9NKY series device will restore the
switch configuration automatically. During this
process, the system LED will blink slowly. The
backup process may take 1 ~ 2 minutes to
complete.
4. When the system LED stops blinking, the
ICE-9NKEY series device can be disconnected
from the configured switches.
2 Startup Manual
