1 of 3
WX-501-0375 • 03.22
6-conductor Cable 8-pin
Connector Pinout
The connector end of the SmartSensor 6-conductor cable mates to the 8-pin connector on the SmartSensor
Matrix and SmartSensor Advance. The sensor itself also contains internal wires that connect to the protective
earth lug.
If you need to terminate your own 6-conductor connector, the cable’s wires should correspond to the holes in the
the connector as shown in the diagram below.
A
+DC
Red
G
Common (ground)
Black
H
NC
B
Data bus +485
Orange/White
C
Data bus -485
Orange
F
C485
Blue/White
E
Control -485
Blue
D
Drain/
shield
0375
