Advantech HPC-2820-ISSE, User Manual

Page: 25 / 178

HPC-2820-ISSE 2-5
2.1.3. Installing.the.top.cover
To install the top cover:
1. Place the rear half of the top cover
over the chassis as shown, and
align the mid-hooks with the notches
on the sides.
2. Slide the cover toward the front
panel until the mid-hooks are
locked into the notches.
4. Push the sliding locks toward the
front edge to secure the front half of
the top cover in place.
3. Flip down the front half part of the
top cover.
Thumbscrew
5. Tighten the thumbscrew on the rear
corner of the cover to completely
secure the top cover.
6. Replace the screw on the rear half
of the cover.