Advantech HPC-2820-ISSE, User Manual

Page: 117 / 178

HPC-2820-ISSE User manual 5-31
The following screens appear when you install Intel ® 5100 and 5300 series
CPU.
Item Specific Help
To select the fan speed
control model.
Hardware Monitor
CPU1 Temperature 39
o
C/102
o
F
CPU2 Temperature 29
o
C/84
o
F
SYSTEM1 Temperature 39
o
C/102
o
F
SYSTEM2 Temperature 29
o
C/84
o
F
CPU_FAN1 Speed 2925 RPM
CPU_FAN2 Speed N/A
FRN_FAN1 Speed N/A
FRN_FAN2 Speed N/A
FRN_FAN3 Speed N/A
FRN_FAN4 Speed N/A
REAR_FAN1 Speed N/A
REAR_FAN2 Speed N/A
Smart Fan Control [Smart Fan II]
CPU1 Target Temperature [00 ºC]
CPU2 Target Temperature [00 ºC]
PhoenixBIOS Setup Utility
Advanced
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select SubMenu F10: Save and Exit
Scroll down to display more items:
Item Specific Help
Full fan speed will
be started when the
temperature reaches the
selected target value.
Hardware Monitor
SYSTEM1 Target Temperature [050]
SYSTEM2 Target Temperature [050]
FBD_FAN1 Speed N/A
FBD_FAN2 Speed N/A
VCORE0 Voltage 1.25 V
VCORE1 Voltage 1.25 V
VTT 1.21 V
+1.5V 1.56 V
+1.8V 1.79 V
+3V 3.28 V
+12V 11.91 V
+5V 4.87 V
+5VSB 4.96 V
VBAT 3.10 V
PhoenixBIOS Setup Utility
Advanced
F1:Help
↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→←
: Select Menu Enter: Select SubMenu F10: Save and Exit
CPU1/2.Temperature,.SYSTEM1/2.Temperature,.CPU_FAN1/2.Speed,.
FRN_FAN1/2/3/4.Speed,..REAR_FAN1/2.Speed
These fields show the auto-detected values and are not user-configurable. If no fan
is installed, the field shows 0 RPM.
Smart.Fan.Control.[Smart.Fan.II]
Allows you to disable or configure the Smart Fan feature.
Configuration options: [Disabled] [Smart Fan] [Smart Fan II]
CPU1/2.Target.Temperature.
Allows you to set the target CPU temperature at which the CPU fan will run at full
speed. Configuration options: [44ºC] ~ [66ºC]