FWA-3260 User Manual v02
_20160302.docx
Copyright 2014 Advantech Co. Ltd. All rights reserved. Page 37
m.2 SSD
ADATA
ADATA IM2S3138E-128GM-B
Transcend
TS64GMTS400 TS64ZBTMM0000A
Transcend
TS64GMTS800 TS64XBTMM0000A
PLEXTOR
PLEXTOR PX-64G7Ge 64GB
96FD42-N064-PLG
PLEXTOR
PLEXTOR PX-128G7Ge 128GB
96FD42-N128-PLG
PLEXTOR
PLEXTOR PX-256G7Ne 256GB
96FD80-N256-PLG
PLEXTOR
PLEXTOR PX-512G7Ne 512GB
96FD80-N512-PLG
Table 15: Validated SATA drives
2.4.6.3
Legacy Functions and IO
2.4.6.3.1
Serial Ports
The SoC integrates two
16C550 compliant UARTs which are mapped to the default
resources:
UART
Port
Resources
Implementation
0
COM1
IO Range 0x3f8 -0x3ff,
IRQ4
Console port
1
COM2
IO Range 0x2f7 – 0x2ff,
IRQ3
Interface to LCM
Table 16: COM Ports
The SoC provide two high-speed serial communication ports (UARTs)with Tx/Rx only. The
UARTs support legacy speeds up to 115.2K bps. Not support hardware flow control
(CTS/RTS)
COM1 is used for console display, baud rate setting need consistent with external terminal.
115.2K is set in BIOS as default value.
2.4.6.3.2
SMBus
The PCH integrates two SMBus controllers. The first one is used as interface to external
devices such as EEPROMs, the hardware monitor; the second controller is not used on the
FWA-3260.