Advantech FWA-2112 User Manual Download Page 31

Page: 31 / 40

FWA-2112 User Manual

pte

r 1
Lin

latf

orm

oft

are

uid

e I

ntr

tio

1.7.2

Command and Usage

Detailed commands and usages please refer to PSU-Status user manual. Please

contact Advantech FAE to get it.
The following is usage:

#sudo ./aps -h

PSU-Status for reading sensors with PMbus.

Usage: aps [OPTION]

Sort entries alphabetically

[-h], Show this help message

[-p], Platform name. Set which platform that use. If unset, list all supported plat

form names

The platform list:

FWA-3270

FWA-4130

FWA-4030

FWA-3270A

FWA-2330

FWA-4000

FWA-3033

FWA-2112

[-s], Power Supply name. Set which power supply that use. If unset, list all sup

ported psu names
The power list:
AC-155A

M1Y2-5300G2H

YM-2301E

YH-2081B

R1S2-5300V4V

R1S2-5300K0V

YM-2301R

YM-2301S

AC-148H

R1CA2301A

YM-2121A

[-f], Read MFR version of the Power supply. It should be after the Power Supply

name
Note: not all Power Supply support read MFR version

[-v], Show PSU-Status version

    Example:
    If you use "FWA-3270" and the Power supply is "AC-155A"
        aps -p "FWA-3270" -s "AC-155A"
    If you use "FWA-3270" and the Power supply is "AC-148H", want to get mfr ver

sion.
aps -p "FWA-3270" -s "AC-148H" -f

Summary of Contents for FWA-2112









































Search results

Summary of Contents for FWA-2112

Reviews:

Related manuals for FWA-2112

Brands by name

Popular brands

Advantech FWA-2112, User Manual

Search results

Summary of Contents for FWA-2112

Reviews:

Related manuals for FWA-2112

Brands by name

Popular brands