FWA-2112 User Manual
20
Get platform sensor readings:
1.7
PSU-Status
1.7.1
Introduction
Power Supply Unit (PSU) is an important hardware component in system, while sta
-
tus of PSU is one of key sensors of system healthy. In NCG platform with BMC con
-
troller, there are several sensors are built-into monitor voltage, current and
temperature of PSU. However in Non-BMC platform, if PSU support PMBus and it’s
connected to PCH, there is another way to get those statuses from x86 Linux: PSU-
Status, which is the utility described here.
PSU-Status is a user space command line utility developed for Non-BMC platform. It
provides usability to read and show out status of PSU. Please note, readable status
is depends on what PSU provide and support.
# sensors -s -c sensors3.conf.adv.fwa2112
# sensors -c sensors3.conf.adv.fwa2112
acpitz-virtual-0
Adapter: Virtual device
temp1: +0.0°C (crit = +91.0°C)
i350bb-pci-0b00
Adapter: PCI adapter
loc1: +48.0°C (high = +120.0°C, crit = +110.0°C)
i350bb-pci-0d00
Adapter: PCI adapter
loc1: +49.0°C (high = +120.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +28.0°C (high = +71.0°C, crit = +91.0°C)
Core 2: +25.0°C (high = +71.0°C, crit = +91.0°C)
Core 6: +27.0°C (high = +71.0°C, crit = +91.0°C)
Core 8: +25.0°C (high = +71.0°C, crit = +91.0°C)
Core 12: +24.0°C (high = +71.0°C, crit = +91.0°C)
nct6106-isa-0000
Adapter: ISA adapter
VCGI_SVID-VOL: +1.04 V (min = +0.45 V, max = +1.30 V)
PAY_3_3-VOL: +3.34 V (min = +3.14 V, max = +3.47 V)
PAY_5_0-VOL: +5.15 V (min = +4.74 V, max = +5.25 V)
PAY_3_3_SB-VOL: +3.26 V (min = +3.14 V, max = +3.47 V)
VBAT-VOL: +3.12 V (min = +2.00 V, max = +3.41 V)
SYS_FAN2-SPEED: 6994 RPM (min = 0 RPM)
SYS_FAN1-SPEED: 6553 RPM (min = 0 RPM)
SYS_FAN3-SPEED: 6338 RPM (min = 0 RPM)
SYS-TMP: +38.0°C sensor = thermistor
CPU-TMP: +29.0°C sensor = thermistor
