![background image](http://html1.mh-extra.com/html/advantech/ep-55xx-ar10/ep-55xx-ar10_user-manual_2858588037.webp)
30
Rear Mount VFD Module Installation
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the system.
3.
Connect the VFD module’s cable connector to the socket on the top of panel back cover.
4.
Secure the VDF module with two screws.
5.
Reconnect the power cord and any external devices, then turn on VFD/LCD power. Finally, turn on
the system power.
NOTE:
The rear mount VFD module’s configuration utility is in the included CD. If you
need configure VFD module, please execute the utility according to the procedure
specified in Chapter 5.
Summary of Contents for EP-55XX-AR10
