manualshive.com logo in svg

Advantech EKI-6558TI, User Manual

Share
Download
Advantech EKI-6558TI User Manual Download Page 70

 

Port Mirroring 

 

The Port mirroring is a method for monitoring traffic in switched networks. Traffic through ports can be 
monitored by one specific port which means traffic goes in or out monitored (source) ports will be 
duplicated into mirroring (destination) port. 

 

•

 

Destination Port: 

There is only one port can be selected to be the destination (mirroring) port for 

monitoring both RX and TX traffic which come from the source port. Or, use one of two ports for 
monitoring RX traffic only and the other one for TX traffic only. The user can connect the mirroring port 
to LAN analyzer or Netxray. 

•

 

Source Port: 

The ports that the user wants to monitor. All monitored port traffic will be copied to 

mirroring (destination) port. The user can select multiple source ports by ticking the 

RX

 or 

TX

 

checkboxes to be monitored. 

•

  And then, click 

Apply

. 

 

 

Figure 3.30: Port Mirroring 

 
 

EKI-6558TI_EKI-6559TMI_Manual_ed2

                            

60 

Summary of Contents for EKI-6558TI




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands