Advantech EKI-6558TI, User Manual

Page: 46 / 99

global configuration command to
set the reauth period.
8021x portstate
[disable | reject | accept | authorize] I
Use the 802.1x port state interface
configuration command to set the
state of the selected port. switch(config)#
interface fastethernet 3
switch(config-if)#
8021x portstate accept
show 8021x
E
Displays a summary of the 802.1x
properties and also the port sates. switch>
show 8021x
no 8021x G
Disable 802.1x function switch(config)#
no 8021x
3.1.14 TFTP Commands Set
Table 3.15: TFTP Commands Set
Commands Level Description Defaults Example
backup flash:backup_cfg
G
Save configuration to TFTP and need
to specify the IP of TFTP server and
the file name of image. switch(config)#
backup flash:backup_cfg
restore flash:restore_cfg
G
Get configuration from TFTP server
and need to specify the IP of TFTP
server and the file name of image. switch(config)#
restore flash:restore_cfg
upgrade flash:upgrade_fw
G
Upgrade firmware by TFTP and need
to specify the IP of TFTP server and
the file name of image. switch(config)#
upgrade lash:upgrade_fw
3.1.15 SystemLog, SMTP and Event
Table 3.16: SysLog,SMTP,Event Commands Set
Commands Level Description Example
systemlog ip
[IP address]
G
Set System log server IP address. switch(config)#
systemlog ip 192.168.1.100
systemlog mode
[client|server|both]
G
Specified the log mode switch(config)#
systemlog mode both
show systemlog E
Displays system log. Switch>
show systemlog
show systemlog
P
Show system log client & server
information switch#
show systemlog
no systemlog G
Disable systemlog functon switch(config)#
no systemlog
smtp enable G
Enable SMTP function switch(config)#
smtp enable
smtp serverip
[IP address]
G
Configure SMTP server IP switch(config)#
smtp serverip 192.168.1.5
smtp authentication G
Enable SMTP authentication switch(config)#
smtp authentication
smtp account
[account]
G
Configure authentication account switch(config)#
smtp account User
smtp password
[password]
G
Configure authentication password switch(config)#
smtp password
smtp rcptemail
[Index] [Email address]
G
Configure Rcpt e-mail Address switch(config)#
smtp rcptemail 1 Alert@test.com
show smtp P
Show the information of SMTP switch#
show smtp
no smtp G
Disable SMTP function switch(config)#
no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G
Set cold start event type switch(config)#
event device-cold-start both
event authentication-failure
[Systemlog|SMTP|Both]
G
Set Authentication failure event
type switch(config)#
event authentication-failure both
event X-ring-topology-change
[Systemlog|SMTP|Both]
G
Set X - ring topology changed
event type switch(config)#
event X-ring-topology-change both
event systemlog
[Link-UP|Link-Down|Both]
I
Set port event for system log switch(config)#
interface fastethernet 3
switch(config-if)#
event systemlog both
event smtp
[Link-UP|Link-Down|Both]
I
Set port event for SMTP switch(config)#
interface fastethernet 3
switch(config-if)#
event smtp both
EKI-6558TI_EKI-6559TMI_Manual_ed2 36