no vlan
V
No VLAN
Switch(vlan)#
no vlan
Ported based VLAN configuration
vlan port-based grpname
[Group Name]
grpid
[GroupID]
port
[PortNumbers]
V
Add new port based VALN
switch(vlan)#
vlan port-based grpname test grpid
2 port 2-4
or
switch(vlan)#
vlan port-based grpname test grpid
2 port 2,3,4
show vlan
[GroupID]
or
show vlan
V
Show VLAN information
switch(vlan)#
show vlan 23
no vlan group
[GroupID]
V
Delete port base group ID
switch(vlan)#
no vlan group 2
IEEE 802.1Q VLAN
vlan 8021q name
[GroupName]
vid
[VID]
V
Change the name of VLAN group, if
the group didn’t exist, this command
can’t be applied.
switch(vlan)#
vlan 8021q name test vid 22
vlan 8021q port
[PortNumber]
access-link untag
[UntaggedVID]
V
Assign a access link for VLAN by
port, if the port belong to a trunk
group, this command can’t be
applied.
switch(vlan)#
vlan 8021q port 3 access-link untag
33
vlan 8021q port
[PortNumber]
trunk-link tag
[TaggedVID List]
V
Assign a trunk link for VLAN by port,
if the port belong to a trunk group,
this command can’t be applied.
switch(vlan)#
vlan 8021q port 3 trunk-link tag
2,3,6,99
or
switch(vlan)#
vlan 8021q port 3 trunk-link tag 3-20
vlan 8021q port
[PortNumber]
hybrid-link untag
[UntaggedVID]
tag
[TaggedVID List]
V
Assign a hybrid link for VLAN by
port, if the port belong to a trunk
group, this command can’t be
applied.
switch(vlan)#
vlan 8021q port 3 hybrid-link untag 4
tag 3,6,8
or
switch(vlan)#
vlan 8021q port 3 hybrid-link untag 5
tag 6-8
vlan 8021q trunk
[PortNumber]
access-link untag
[UntaggedVID]
V
Assign a access link for VLAN by
trunk group
switch(vlan)#
vlan 8021q trunk 3 access-link untag
33
vlan 8021q trunk
[PortNumber]
trunk-link tag
[TaggedVID List]
V
Assign a trunk link for VLAN by trunk
group
switch(vlan)#
vlan 8021q trunk 3 trunk-link tag
2,3,6,99
or
switch(vlan)#
vlan 8021q trunk 3 trunk-link tag 3-
20
vlan 8021q trunk
[PortNumber]
hybrid-link untag
[UntaggedVID]
tag
[TaggedVID List]
V
Assign a hybrid link for VLAN by
trunk group
switch(vlan)#
vlan 8021q trunk 3 hybrid-link untag
4 tag 3,6,8
or
switch(vlan)#
vlan 8021q trunk 3 hybrid-link untag
5 tag 6-8
show vlan
[GroupID]
or
show vlan
V
Show VLAN information
switch(vlan)#
show vlan 23
no vlan group
[GroupID]
V
Delete port base group ID
switch(vlan)#
no vlan group 2
3.1.7
Spanning Tree Commands Set
Table 3.8: Spanning Tree Commands Set
Commands
Level
Description
Example
spanning-tree enable
G
Enable spanning tree
switch(config)#
spanning-tree enable
spanning-tree priority
[0~61440]
G
Configure spanning tree priority
parameter
switch(config)#
spanning-tree priority 32767
spanning-tree max-age
[seconds]
G
Use the spanning-tree max-age
global configuration command to
switch(config)#
spanning-tree max-age 15
31 Chapter3
