Advantech EKI-6311GN User Manual Download Page 15

Page: 15 / 79

EKI-6311GN-User_Manual V2.1

Page 9

Chapter 2

Installation

This chapter describes safety precautions and product information you have to know and check

before installing EKI-6311GN.

2.1 Preparation before Installation

Professional Installation Required

Please seek assistance from a professional installer who is well trained in the RF installation and

knowledgeable in the local regulations.

Safety Precautions

To keep you safe and install the hardware properly, please read and follow these safety

precautions.

If you are installing EKI-6311GN for the first time, for your safety as well as others’, please seek

assistance from a professional installer who has received safety training on the hazards

involved.

Keep safety as well as performance in mind when selecting your installation site, especially

where there are electric power and phone lines.

When installing EKI-6311GN, please note the following things:

♦

Do not use a metal ladder;

♦

Do not work on a wet or windy day;

♦

Wear shoes with rubber soles and heels, rubber gloves, long sleeved shirt or jacket.

When the system is operational, avoid standing directly in front of it. Strong RF fields are

present when the transmitter is on.

Summary of Contents for EKI-6311GN
















































































Search results

Summary of Contents for EKI-6311GN

Reviews:

Related manuals for EKI-6311GN

Brands by name

Popular brands

Advantech EKI-6311GN, User Manual

Search results

Summary of Contents for EKI-6311GN

Reviews:

Related manuals for EKI-6311GN

Brands by name

Popular brands