Advantech EKI-6311GN, User Manual

Page: 37 / 79

EKI-6311GN-User_Manual V2.1 Page 31
find the IEEE 802.11b/g/n Wireless Outdoor CPE, so that malicious attack by some illegal STA
could be avoided.
Wireless Separation: Wireless separation is an ideal way to enhance the security of network
transmission. Under the mode except wireless client mode, enable “Wireless Separation” can
prevent the communication among associated wireless clients.
WMM Support: WMM (Wi-Fi Multimedia) is a subset of 802.11e. It allows wireless
communication to define a priority limit on the basis of data type under AP mode only, thus those
time-sensitive data, like video/audio data, may own a higher priority than common one. To
enable WMM, the wireless client should also support it
Max. Station Number: By checking the “Max. Station Num” the CPE will only allow up to 32
wireless clients to associate with for better bandwidth for each client. By disabling the checkbox
the CPE will allow up to 128 clients to connect, but it is likely to cause network congestion or
poor performance.
Security Setting:
To prevent unauthorized radios from accessing data transmitting over the connectivity, the IEEE
802.11a/n Wireless Outdoor CPE provides you with rock solid security settings.
VLAN Tab
If your network uses VLANs, you can assign one SSID to a VLAN, and client devices using the SSID are
grouped in that VLAN.
To allow users on the VLAN to access the WEB page of the
IEEE 802.11a/n Wireless Outdoor CPE, you
need to enable “Enable 802.1Q VLAN” and assign a management VLAN ID for your device. Make
sure the assigned management VLAN ID is identical to your network VLAN ID to avoid failures of
accessing the Web page of the EKI-6311GN.
Figure 5 Management VLAN ID