EKI-1500 Series User Manual
66
6.9.2
Reboot
The configuration will take effect after clicking Save button. All configurations are
saved to flash memory after a system reboot. Press the Reboot button and the sys-
tem will give a reset response. It will take a few seconds to reconnect with the new
values.
To access this page, click
Tools
>
Reboot
.
Figure 6.15 Tools > Reboot
Click
Yes
to reboot the serial device server. Any configuration changes you have
made since the last time you saved will be lost.
6.10
Management
The EKI serial device server allows for easy installation and maintenance and reli-
able maintenance access from anywhere. With the reliable management tools avail-
able, you can streamline staffing and troubleshooting requirements to a centralized
system.
6.10.1
Log File
If users enable the system event or serial event to log in file, users can download the
log file from here.
To access this page, click
Management
>
Log File
.
Figure 6.16 Management > Log File
The following table describes the items in the previous figure.
Item
Description
System Log File
Click the drop-down menu to select a specific action for the system
log file. Available options: Download System Log, Remove System
Log, Download and Remove System Log.
Export
Click
Export
to download the log file.
Summary of Contents for EKI-1500 Series
