53
EKI-1500 Series User Manual
6.1
Overview
EKI-1500 Series serial device server can be configured through a web interface. By
using a standard web browser, the same procedure as with the Windows configura-
tion utility can be used. In the browser’s address field, enter the IP Address of your
EKI-1500 Series serial device server. The default IP setting is 10.0.0.1, but you
should use the IP which you have previously assigned for this device. Once the IP is
entered, you will be presented with the following windows.
6.2
Accessing the Web Page
6.2.1
Accessing the Web Page via Configuration Utility
To access the web page via configuration utility:
1.
Select Ethernet under the desired device.
2.
Click
Launch Browser
.
Figure 6.1 Accessing the Web Page via Configuration Utility
Note!
Before using the web-based configuration, make sure your host PC
Ethernet network IP domain is as same as the serial device server, or it
can establish the TCP connection with the serial device server.
Note!
It is recommended that you use Microsoft Internet Explorer 7.0 or
higher.
Summary of Contents for EKI-1500 Series
