background image

3

 

 

Product Warranty (18 months)   

Advantech warrants to you, the original purchaser, that each of its products will be free from 

defects in materials and workmanship for two years from the date of purchase.   

This warranty does not apply to any products which have been repaired or altered by 

persons other than repair personnel authorized by Advantech, or which have been subject to 

misuse, abuse, accident or improper installation. Advantech assumes no liability under the 

terms of this warranty as a consequence of such events.   

Because of Advantech’s high quality-control standards and rigorous testing, most of our 

customers never need to use our repair service. If an Advantech product is defective, it will 

be repaired or replaced at no charge during the warranty period. For outof-warranty repairs, 

you will be billed according to the cost of replacement materials, service time and freight. 

Please consult your dealer for more details.   

If you think you have a defective product, follow these steps:   

Collect all the information about the problem encountered. (For example, CPU speed, 

Advantech products used, other hardware and software used, etc.) Note anything abnormal 

and list any onscreen messages you get when the problem occurs.   

Call your dealer and describe the problem. Please have your manual, product, and 

any helpful information readily available.   

If your product is diagnosed as defective, obtain an RMA (return merchandise 

authorization) number from your dealer. This allows us to process your return more quickly.   

Carefully pack the defective product, a fully-completed Repair and Replacement Order 

Card and a photocopy of the proof of purchase date (such as your sales receipt) in a 

shippable container. A product returned without proof of the purchase date is not eligible for 

warranty service.   

Write the RMA number visibly on the outside of the package and ship it prepaid to your 

dealer.  

Declaration of Conformity 

 

FCC Class B

 

Note: This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in a 

commercial environment. This equipment generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance with the instruction manual, may cause 

harmful interference to radio communications. Operation of this equipment in a residential 

area is likely to cause harmful interference in which case the user will be required to correct 

the interference at his own expense.   

Summary of Contents for DS-563SQ-S6A1E



























Reviews: