8
6
INFORMATION ON SAFE MOUNTING
During the mounting process
The DLT-V72 can fall down and cause injuries due to its weight.
−
Use the assistance of a second person for installation work.
−
Always hold the DLT-V72 by the housing with both hands.
−
Never use the antenna cap as a handle as it may break due to the weight involved.
The strain relief rail of the DLT-V72 can have sharp edges and cause cutting injuries.
−
Do not hold the DLT-V72 by the strain relief plate.
Choosing the mounting position and installation environment
−
The installation height of the device shall not exceed 2 m.
−
The ergonomic operability of the DLT-V72 should be taken into account when selecting the
mounting position.
−
Mount the DLT-V72 in such a way that no persons can be injured if the device mounting
should break (e.g. as a result of a fatigue fracture).
−
Otherwise, it is essential to adopt corresponding safety measures.
−
Ensure that the installation environment is correct, as is not permitted to result in an enclosed
system because the cooling concept of the DLT-V72 requires fresh air. Without a supply of
fresh cooling air, the DLT-V72 may overheat and may be damaged beyond repair.
Specific information on vehicle mounting (forklifts, etc.)
−
Mount the DLT-V72 so that the driver's field of view remains clear and safe driving operation is
guaranteed.
−
During the mounting process, observe the requirements of the vehicle manufacturer relating to
attaching auxiliary devices and connecting auxiliary consumers.
−
Observe all requirements relating to welding or drilling on support components of the vehicle.
−
Observe the more detailed information on the mounting process given in the “DLT-V72
Operating Instructions” available online, for example on the potential conditions on vehicles,
requirements for electrically isolated mounting, etc.
