Advantech ASMB-976 Series User Manual Download Page 47

Page: 47 / 126

ASMB-976 User Manual

Chapter 3

AMI BIOS

3.2.2.4

IT8528 HW Monitor



Watchdog Timer

Enable or disable the watchdog timer function.



CPU ACPI Shutdown Temperature

Enable or disable the ACPI shutdown temperature threshold. When the system

reaches the shutdown temperature, it will be automatically shut down by ACPI

OS to protect the system from overheat damage.



CPU Warning Temperature

Enable or disable the CPU warning temperature threshold. When the system

reaches the warning temperature, the speaker will beep.



Fan Configuration

The default of CPU/System FAN is Smart FAN mode and the BIOS will automat

ically control the FAN speed by CPU temperature.

When set to manual mode, fan duty setting can be changed; the range is from

30%~100%, default setting is 50%.

Summary of Contents for ASMB-976 Series































































































































Search results

Summary of Contents for ASMB-976 Series

Reviews:

Related manuals for ASMB-976 Series

Brands by name

Popular brands

Advantech ASMB-976 Series, User Manual

Search results

Summary of Contents for ASMB-976 Series

Reviews:

Related manuals for ASMB-976 Series

Brands by name

Popular brands