Advantech ASMB-976 Series User Manual Download Page 40

Page: 40 / 126

ASMB-976 User Manual

3.1

Introduction

With the AMI BIOS Setup program, you can modify BIOS settings and control the

special features of your computer. The Setup program uses a number of menus for

making changes and turning the special features on or off. This chapter describes the

basic navigation of the ASMB-976 setup screens.

AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic

system configuration. This type of information is stored in battery-backed up CMOS

so it retains the Setup information when the power is turned off.

Note!

The BIOS setup screens shown in this chapter are for reference only,

they may not exactly match what you see on your display devices.

Summary of Contents for ASMB-976 Series































































































































Search results

Summary of Contents for ASMB-976 Series

Reviews:

Related manuals for ASMB-976 Series

Brands by name

Popular brands

Advantech ASMB-976 Series, User Manual

Search results

Summary of Contents for ASMB-976 Series

Reviews:

Related manuals for ASMB-976 Series

Brands by name

Popular brands