![background image](http://html1.mh-extra.com/html/advantech/arma-k100-crm/arma-k100-crm_installation-and-operating-manual_2856490033.webp)
ARMA-K100-CRM
32
MENU (SCREEN) PAGE #3
Figure 9
: Page #3 of the Communication Program
F1 -
Remote
: prevents the unit from going to LOCAL mode. This is to be used with rack-mount
units when the operator requests to go local and the control room wants to lock out the local
operator, not allowing him to take control over the operation of the unit.
F2 -
Leds
: queries the unit for LEDs information (like in Menu Page #1).
F3 – F6 – Functions not applicable for this unit.
F7 –
AddrPA
: to change the communication address of the SSPA. This address will take effect
after the next power-up of the unit or after performing a Reset command on the unit (use
Menu Page #1 function key ‘F5’ for Reset).
F8 –
PageA
: to load Flash Memory page A (the unit will wait for flash data to be uploaded).
F9 –
PageB
: to load Flash Memory page B (the unit will wait for flash data to be uploaded).
F10 –
More
: to return to Menu Page #1.
Copyright 1995.
F1
Remote
F2
Leds
F3
NoPrio
F4
PriorA
F5
ProtPC
F6
ProtPA
F7
AddrPA
F8
PageA
F9
PageB
F0
More
ADVANTECH - Advanced Microwave Technologies, Inc.
Address
: 0
Leds info
: >00AL110000 001 S001 00#I
PAGE - 3 - PROTOCOL: ADV, 9600, E Rev 1.4
Alt-X to exit