![background image](http://html1.mh-extra.com/html/advantech/amax-3245/amax-3245_user-manual_2857222019.webp)
13
AMAX-3245 User Manual
Chapter 3
H
ardware
W
iring
3.2
Over Traveling Limit Switch Input [LMT+/-] &
Home (ORG)
Over traveling limit switches are used for system protection. When the limit switch is
applied, the signal will flew the optocoupler and the external power VEX DC 24 V will
be the source of the photo coupler.
The Home are used for fixing original position and signal of every axis.
Figure 3.3 Circuit Diagram of Limit Input Signals and Home (CN6-CN9)
3.3
Position latch [LTC]
When the position capture signal LTC is triggered, the buffer will latch the current
encoder position information, and the user can read the position counter by program-
ming.
3.4
In-Position Signal [INP]
The In-Position range (or deviation) is usually defined by servo drive. When the
motor moves and converges within this range (or deviation), the servo driver will
send the signal out to indicate that the motor is in the defined position.
3.5
Alarm [ALM]
This input is from servo drive which will generate the alarm signal to indicate any
operation error.
Note!
LTC and general input share interfaces which can be switched by soft-
ware function. (Refer to Figure 3.6 Circuit Diagram of general input)
Summary of Contents for AMAX-3245
