Advantech AMAX-3245, User Manual

Page: 16 / 24

AMAX-3245 User Manual 10
LINKO & LINK1 LED (Green)
Run LED (Green)
Err LED (Red)
STS LED (Green)
2.2.7.2 Running
LED Status Connection Status Activation Trigger Requirements
Last Yes No Port On / Connection
Flash Yes Yes Port On / Connection
Off No No Port Off / Disconnection
LED Status Salve Module Status Requirements
Off INITIALISATION The device in initialization
Slow Flash PRE-OPERATIONAL The device in pre-operation
Single Flash SAFE-OPERATIONAL The device in safe-operation
Last OPERATIONAL The device in normal operation.
Quick Flash BOOTSTRAP
The device boots states
1. The device is starting up and
doesn’t begin initialization.
2. The device is upgrading firm-
ware.
LED Status Error Description Description Reasons
Off Correct
Salve module in
normal running
Quick Flash Wrong Configuration
Wrong salve mod-
ule configuration
1. Wrong packet parame-
ters of EtherCAT cause
wrong salve module sta-
tus.
2. Control chip in salve
module detects wrong
hardware configuration.
Single Flash Wrong salve module
Status switch
caused by mistakes
Synchronization errors cause
salve module turn from 0P to
Safe0P status.
Double Flash
Data processing or
EtherCAT watchdog
timer overtime
Watchdog timer
overtime Watchdog in Sync Manger over-
time
LED Status Description
OFF Power supply disconnection
Flash The device in normal operation
LED Axis Name Description
D7/10/13/16 Axis 0-4 ORG Home
D8/11/14/17 Axis 0-4 LMT+ Limit+
D9/12/15/18 Axis 0-4 LMT- Limit-