Advantech AIMB-556 User Manual Download Page 73

Page: 73 / 142

Chapter 3

3.4.5 Palette Snooping

Set this value to allow the system to modify the Palette Snooping settings.
The Optimal and Fail-Safe default setting is Disabled.

3.4.6 PCI IDE BusMaster

Set this value to allow or prevent the use of PCI IDE Busmastering. The
Optimal and Fail-Safe default setting is Disabled.

3.4.7 Off Board PCI/ISA IDE Card

Set this value to allow an add-on PCI/ISA IDE card to be selected. The
Optimal and Fail-Safe default setting is Auto.

3.4.8 IRQ

IRQ[3,4,5,7,9,10,11,14,15]:

•

Available

: Specified IRQ is available to be used by PCI/PnP devices.

•

Reserved

: Specified IRQ is reserved for use by Legacy ISA devices.

DMA Channel [0,1,3,5,6,7]:

•

Available

: Specified DMA is available to be used by PCI/PnP devices.

•

Reserved

: Specified DMA is reserved for use by legacy ISA devices.

•

Reserved Memory Size

: Size of memory block to reserve for legacy

ISA devices.

Summary of Contents for AIMB-556















































































































































Search results

Summary of Contents for AIMB-556

Reviews:

Related manuals for AIMB-556

Brands by name

Popular brands

Advantech AIMB-556, User Manual

Search results

Summary of Contents for AIMB-556

Reviews:

Related manuals for AIMB-556

Brands by name

Popular brands