Advantech AIMB-556 User Manual Download Page 61 | Manualshive

Page: 61 / 142

background image

47

Chapter 3

3.1 Entering Setup

Turn on the computer and check for the “patch” code. If there is a number
assigned to the patch code, it means that the BIOS supports your CPU. If
there is no number assigned to the patch code, please contact an Advan-
tech application engineer to obtain an up-to-date patch code file. This will
ensure that your CPU’s system status is valid. After ensuring that you
have a number assigned to the patch code, press <DEL> and you will
immediately be allowed to enter Setup.

Figure 3.2: Press Del to run Setup

«
...
59
60
61
62
63
...
»

Summary of Contents for AIMB-556















































































































































Reviews:

No comments

Related manuals for AIMB-556

Brand: IEI Technology Pages: 12

Brand: IEI Technology Pages: 190

Brand: IEI Technology Pages: 8

Brand: IEI Technology Pages: 193

Brand: IEI Technology Pages: 182

KINO-DBT Series

Brand: IEI Technology Pages: 133

Brand: Avalue Technology Pages: 82

790XT-G35 series

Brand: MSI Pages: 103

Brand: Biostar Pages: 63

Brand: Renesas Pages: 30

Qseven conga-QA5

Brand: Congatec Pages: 61

Brand: Aura Light Pages: 8

Brand: Supermicro Pages: 1

Brand: Advantech Pages: 104

Brand: A-Trend Pages: 44

Brand: Freescale Semiconductor Pages: 17

BOXD945GCLL - Socket 775 MicroATX Motherboard

Brand: Intel Pages: 90

Brand: ASROCK Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands