Advantech AIMB-556 User Manual Download Page 66

Page: 66 / 142

AIMB-556 User Manual

Primary IDE Slave

While entering setup, the BIOS automatically detects the presence of IDE
devices. This displays the status of IDE device auto-detection.

Secondary/Third/Fourth IDE Master

While entering setup, the BIOS automatically detects the presence of IDE
devices. This displays the status of IDE device auto-detection.

Secondary/Third/Fourth IDE Slave

While entering setup, the BIOS automatically detects the presence of IDE
devices. This displays the status of IDE device auto-detection.

AHCI Configuration

AHCI is a new interface specification that allows the SATA controller
driver to support advanced features. While entering setup, BIOS auto
detects the presence of AHCI devices. This displays the status of auto
detection of AHCI devices.

3.3.3 Super I/O Configuration

Figure 3.7: Super I/O Configuration

Summary of Contents for AIMB-556















































































































































Search results

Summary of Contents for AIMB-556

Reviews:

Related manuals for AIMB-556

Brands by name

Popular brands

Advantech AIMB-556, User Manual

Search results

Summary of Contents for AIMB-556

Reviews:

Related manuals for AIMB-556

Brands by name

Popular brands