Advantech AIMB-340F series, User Manual

Page: 29 / 128

15 Chapter 2
When the CPU is installed, the lever should snap into place at the side of
the socket.
2.5.2 CMOS clear (SW2)
2.6 DRAM installation
There are two on-board 186-pin DDR DIMM sockets.
2.6.1 DDR SDRAM (DIMM 1 and DIMM 2)
You can install one DDR SDRAM (up to 1 GB) or two 186-pin DIMM
(up to 2 GB DRAM) in the DIMM sockets.
Note: To remove a CPU, pull the lever out to the side a
little and raise it
Warning! To avoid damaging the computer, always unplug
the power cord to turnoff the power supply
before setting “Clear CMOS.” Use a pencil or a
tool to press the tactile-switch.
Caution! When installing DIMM, make sure the module is
oriented properly. Do not use excess force dur-
ing installation.