Advantech AIMB-340F series, User Manual

Page: 28 / 128

AIMB-340F User’s Manual 14
2.5 CPU installation and upgrading
You can upgrade to a higher power Pentium 4 processor at any time. Sim-
ply remove the old CPU, install the new one, and the BIOS will auto
detect the new CPU type and speed.
2.5.1 Installing a CPU in the ZIF socket
AIMB-340F provides a Zero Insertion Force (ZIF) socket for easy CPU
installation.
1.
Make sure the ZIF socket lever is in the upright position. To raise
the lever, pull it out to the side a little and raise it as far as it will go.
2. Place the CPU in the empty socket. Follow the instructions that
came with the CPU. If you have no instructions, do the following:
Carefully align the CPU so it is parallel to the socket and the notch
on the corner of the CPU corresponds with the notch on the inside
of the socket. Gently slide the CPU in. It should insert easily. If it
does not, pull the lever up a little more.
3. Press the lever down. The plate will slide forward. You will feel
some resistance as the pressure starts to secure the CPU in the
socket. This is normal and will not damage the CPU.
Warning! Always disconnect the power cord from your
chassis when you are working on it. Do not make
connections while the power is on as sensitive
electronic components can be damaged by the
sudden rush of power. Only experienced elec-
tronics personnel should open the PC chassis
Caution! Always ground yourself to remove any static
charge before touching the PC board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis.