Advantech AIMB-215 B1 User Manual Download Page 85

Page: 85 / 134

AIMB-215 B1 User Manual

Chapter 3

IOS Operation

3.2.6

Save and Exit



Save Changes and Exit

This item allows users to save changes and exit the system setup page.



Discard Changes and Exit

This item allows users to exit the system setup without saving changes.



Save Changes and Reset

This item allows users to reset the system setup after saving changes.



Discard Changes and Reset

This item allows users to reset the system setup without saving changes.



Save Changes

This item allows users to save changes to all options.



Discard Changes

This item allows users to discard changes to all options.



Restore Defaults

This item allows users to restore/load the default values for all options.



Save as User Defaults

This item allows users to save changes as user defaults.



Restore User Defaults

This item allows users to restore the user defaults for all options.



Boot Override

This item allows users to override boot priority with a selected boot device.



Launch EFI Shell From a File system Device

This item allows users to launch an EFI Shell application (Shellx64.efi) from an
available file system device.

Summary of Contents for AIMB-215 B1







































































































































Search results

Summary of Contents for AIMB-215 B1

Reviews:

Related manuals for AIMB-215 B1

Brands by name

Popular brands

Advantech AIMB-215 B1, User Manual

Search results

Summary of Contents for AIMB-215 B1

Reviews:

Related manuals for AIMB-215 B1

Brands by name

Popular brands