Advantech AIMB-215 B1 User Manual Download Page 74

Page: 74 / 134

AIMB-215 B1 User Manual

3.2.2.17

Intel

TXE and Anti-Theft Technology Configuration



TXE

This item allows users to enable or disable TXE.



TXE HMRFPO

This item allows users to enable or disable TXE HMRFPO.



TXE Firmware Update

This item allows users to enable or disable TXE firmware updates.



TXE EOP Message

This item allows users to send EOP messages before entering the OS.



Intel® AT

This item allows users to enable or disable the BIOS AT code from running.



Intel® AT Platform PBA

This item allows users to enable or disable the BIOS AT code from running.



Enter Intel® AT Suspend Mode

This item allows users to request that a platform enter AT Suspend mode (this
option is only available when AT enrolled).

Summary of Contents for AIMB-215 B1







































































































































Search results

Summary of Contents for AIMB-215 B1

Reviews:

Related manuals for AIMB-215 B1

Brands by name

Popular brands

Advantech AIMB-215 B1, User Manual

Search results

Summary of Contents for AIMB-215 B1

Reviews:

Related manuals for AIMB-215 B1

Brands by name

Popular brands