Advantech AIMB-215 B1, User Manual

Page: 28 / 134

AIMB-215 B1 User Manual 16
2.1 Introduction
Most of the device connectors can be accessed from the top of the board during
installation in the chassis. If the system is installed with several cards or the chassis
is packed, partial removal of the card may be necessary to make all connections.
2.2 LAN and USB Ports (LAN1/2, USB0102/
USB0304/USB0506/USB0708)
AIMB-215 B1 provides up to seven USB 2.0 and one USB 3.0 ports. One USB 3.0
and three USB 2.0 are located on the rear side. The USB interface complies with the
USB specification revision 2.0 that supports transmission rates of up to 480 Mbps,
and revision 3.0 that supports transmission rates of up to 5 Gbps, and is also fuse
protected. Furthermore, the USB interface can be disabled in the system BIOS setup
menu.
The AIMB-215 B1 system is equipped with two high-performance 1000 Mbps Ether-
net LAN adapters, both of which are supported by all major network operating sys-
tems. The RJ-45 jacks on the rear panel facilitate convenient LAN connection.
Table 2.1: LAN LED Indicators
LAN Mode LAN Indicator
1 Gbps link on LED1 Green on
100 Mbps link on LED1 Orange on
Active LED2 Green flashing
Note! If Windows 7 is selected as the OS, users must install a USB 3.0 XHCI
driver.
Please refer to Chapter 8 for information on XHCI driver installation.
USB0102
USB0304
USB0506
1
3
5
7
4
6
8
10
2
USB0708
2
4
6
8
10
1
3
5
7