47
AGS-910 User Manual
Chapter 3
A
MI BIOS
3.2.2.8
USB Configuration
Legacy USB Support
This is for supporting USB device under a legacy OS such as DOS. When
choosing "AUTO", the system will automatically detect if any USB device is
plugged into the computer and enable USB legacy mode when a USB device is
plugged and disable USB legacy mode when no USB device is attached.
EHCI Hand-off
This is a workaround for OS without EHCI hand-off support.
The EHCI ownership change should be claimed by EHCI driver.
USB Mass Storage Driver Support
Enable/Disable USB mass storage driver support.
USB Transfer Time-out
Selects the USB transfer time-out value. [1,5,10,20sec]
Device Reset Time-out
Selects the USB device reset time-out value. [10,20,30,40 sec]
Device Power-up Delay
This item appears only when Device power-up delay item is set to [manual].
Summary of Contents for AGS-910
