AGS-910 User Manual
32
Note!
Rack Mount Instructions - The following or similar rack-mount instruc-
tions are included with the installation instructions:
Elevated Operating Ambient - If installed in a closed or multi-unit
rack assembly, the operating ambient temperature of the rack envi-
ronment may be greater than room ambient. Therefore, consider-
ation should be given to installing the equipment in an environment
compatible with the maximum ambient temperature (Tma) speci-
fied by the manufacturer.
Reduced Air Flow - Installation of the equipment in a rack should
be such that the amount of air flow required for safe operation of
the equipment is not compromised.
Mechanical Loading - Mounting of the equipment in the rack should
be such that a hazardous condition is not achieved due to uneven
mechanical loading.
Circuit Overloading - Consideration should be given to the connec-
tion of the equipment to the supply circuit and the effect that over-
loading of the circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
Reliable Earthing - Reliable earthing of rackmounted equipment
should be maintained. Particular attention should be given to sup-
ply connections other than direct connections to the branch circuit
(e.g. use of power strips).
Instructions de montage en rack - Le rack en suivant ou similaire -
monter instructions sont incluses avec les instructions d'installation:
Température de fonctionnement élevée - il est installé dans une
unité fermée ou plusieurs Ensemble formant bâti, la température
ambiante de fonctionnement de l'environnement de l'armoire peut
être supérieure à la chambre ambiante. Par conséquent, il devrait
être donnée à l'installation de l'équipement dans un environnement
compatible avec la température ambiante maximale (Tma) spéci-
fiée par le fabricant.
Débit d'air réduit - Installation de l'équipement dans un rack doit
être tel que la quantité de flux d'air nécessaire au bon fonc-
tionnement de l'appareil ne soit pas compromise.
Chargement mécanique - Le montage de l'équipement dans le
rack doit être telle qu'une situation dangereuse ne soit générée à
inégale chargement mécanique.
Surcharge du circuit - Il faut tenir compte à la connexion de l'équi-
pement au circuit d'alimentation et l'effet que la surcharge des cir-
cuits pourrait avoir sur la protection contre les surintensités et le
câblage d'alimentation. Considération appropriée de l'équipement
plaque signalétique évaluations doivent être utilisés pour répondre
à cette préoccupation.
Fiabilité de la mise - Fiable mise à la terre de l'équipement monté
en rack doit être maintenue. Une attention particulière devrait être
accordée à fournir connexions autres que les connexions directes
sur le circuit de branche (par exemple l'utilisation de multiprises).
Summary of Contents for AGS-910
