Advantage BG-N4 Series, Instruction Manual

Page: 36 / 76

BG-N4 Glycol Chiller
Page: 36
ADVANTAGE ENGINEERING, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729 Fax: 317-881-1277
Service Department Fax: 317-885-8683
Email: service@AdvantageEngineering.com
3.10 INSTRUMENT : MACHINE MENU
A. The Machine Menu allows the units to set values for these items :
B. Set Date
1. Set the date by selecting the Set Date option from the Machine Menu. Using the
Up and Down Arrow keys to select the month, day and year. Use the Select and
Back Buttons to advance between Month, Day and Year.
C. Set Time.
1. Set the time by selecting the Set Time option from the Machine Menu. Using the
Up and Down Arrow keys to select the hour, minute and seconds. Use the Select
and Back Buttons to advance between Hour, Minute and Seconds.
D. Minimum Setpoint. This parameter sets the lowest permissible setpoint temperature.
The factory setting is 20°F. The range is from 20°F - 60°F.
1. For Minimum Setpoints below 48°F. A warning is displayed when a minimum
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
Machine
Set Date
Set Time
Min Setpoint
Hi Temp Shutdown
Units
Back Pick Go
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
Main Menu
Setpoints
Utilities
Network
Flow
Options
Machine
Back Pick Go
Main Menu
Setpoints
Utilities
Network
Flow
Options
Machine
Back Pick Go
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
Machine
Secondary Pump
Chiller Type
Cooling Source
Back Pick Go
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
Machine
LP Cutout
LP CutIn
LP Start Up Delay
LP Run Delay
HP Cutout
Back Pick Go
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
Main Menu
Setpoints
Utilities
Network
Flow
Options
Machine
Back Pick Go
Set Date
Month Day Year
July 25, 2018
Wednesday
Back Adjust Day
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
Machine
Set Date
Set Time
Min Setpoint
Hi Temp Shutdown
Units
Back Pick Go
July
Warning
Operation at less than
48°F requires appropriate
levels of glycol.
Cancel
Confirm
Back Select OK
Minimum Setpoint
46°F
Back Adjust OK
Machine
Set Date
Set Time
Min Setpoint
Hi Temp Shutdown
Units
Back Pick Go
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
Main Menu
Setpoints
Utilities
Network
Flow
Options
Machine
Back Pick Go
Set Time
Back Adjust Minute
To Process
S e t p o i n t : 5 0 ° F
C i r c u l a t i n g
50°F
Machine
Set Date
Set Time
Min Setpoint
Hi Temp Shutdown
Units
Back Pick Go
14 : 42 : 42