8
IV. System Operation Overview
Operation
MegaTron XSi controllers have two modes of operation, RUN and SET-UP.
RUN
- This mode is for normal operation. In the RUN mode the display will show each system’s parameters.
If an alarm is present, the ALARM box will flash how many alarms are activated. No settings may be entered
or changed in the RUN mode. Readings are updated every 6 seconds on the screen while in the RUN mode.
SET-UP
- This mode is used to adjust settings and readings on the controller. To access the SET UP mode
from the RUN screen, press the SETUP/RUN key.
V. Menu Navigation
To access the menus press the Set Up / Run key on the front panel. This takes you to the Home menu.
MegaTron XSi controller’s menus are easily navigated by pressing the associated number key next to a
menu box on the screen. Once you have stepped through the sub menus to reach a point at which a value
or selection is made a Pop-up window will appear prompting you to enter a desired value or selection.
NOTE:
When entering new numeric values, enter all available digits (characters).
1.
Home Menu
From the
HOME
menu select the desired menu.
The menu name explains what parameters can be
programmed in the menu.
SET POINTS
-
Setting control set points for mA inputs and digital input alarming.
CALIBRATION
-
Calibrating mA signals if present.
CUSTOMIZE
-
Giving the controller, system, mA iputs and all relays a user defined name.
ALARMS
-
View current alarms.
DAY/TIME
-
Menu for setting date and time.
CONFIGURE
-
Menus for configuring passwords, relay activations, setting history interval, contrast.
HISTORY
-
Allows for view history on board in a graph form.
TOTALIZERS
-
Menu for configuring flow meter totalizing if present.
RELAYS
-
Menu for resetting accumulated “ON” times and manual relay activation.
>HOME SETUP<
SETPOINTS DATE/TIME
CALIBRATION CONFIGURE
HISTORY
CUSTOMIZE TOTALIZERS
ALARMS RELAYS
