ADVANSEA FX-400, User Manual

Page: 19 / 183

User manual FX-400 - 19 -
the transceiver exits scanning and normal communication is resumed.
To create or add channels to the memory channel bank:
• Press the key. The Memory Scan channel bank appears in
lower two lines of the display. If no channels have been previously
added to the bank, the Primary Calling Channel (16) is displayed.
Otherwise, up to six channel numbers appear. A plus sign (+) at the
end of the lower line indicates more than six channels are stored in the
bank. Press the
key again to advance to the next page of
channels. The memory channel bank can hold all usable voice
communication channels.
INT ADD/DELETE
MEM CHANNEL
16
INT
ADD/DELETE
MEM CHANNEL
06 09 16
22 67 68 +
INT ADD/DELETE
MEM CHANNEL
72 78
Memory Scan Bank Memory Scan Bank Memory Scan Bank
Default Page Page Full Next Page
• Rotate the SELECT/ENT knob or microphone keys to select a desired
channel to add to the memory channel bank.
• Press and hold the key for about two seconds. The selected
channel is stored and the channel number appears in the memory
channel bank. Repeat the select and store process to add more
preferred channels. As each channel is added, the existing channels
in the bank shift as necessary to display the new channel number in the
bank.
When in the normal communication mode, as channels are selected,
MEM CHANNEL appears in the second line of the display if the
selected channel is stored as a memory channel.
INT
16 PRI. HI
MEM CHANNEL
N 28 04.814
W 83 42.169
Memory Channel Display
To remove channels from the memory channel bank:
• Press the key. The Memory Scan channels appear in the
display.
• Rotate the SELECT/ENT knob or use microphone keys to select a
displayed channel.
• Press and hold the key for about two seconds. The selected
channel is deleted and the channel number is removed from the
memory channel bank.