User manual FX-400
- 14 -
5.3 Basic Operation
Power On/Off
Power to the transceiver is controlled with the VOLume knob. When the
VOL knob is in the full CCW position the unit is turned Off.
To turn the transceiver On:
•
Rotate the VOL knob CW until it clicks over the detent. The LCD
backlight illuminates and the Power-On screen appears.
INT
FX-400
CODE 000.00
Power-On Screen
After approximately two seconds, the Normal Communication screen
appears in the display.
INT
16 PRI. HI
MEM CHANNEL
N 28 04.814
W 83 42.169
INT
16 PRI. HI
MEM CHANNEL
99 99.999
999 99.999
Normal Com Screen
Normal Com Screen
with GPS Connected
w/o GPS connected
To turn the transceiver Off:
•
Rotate the VOL knob CCW until it clicks over the detent to the OFF
position.
Volume and Squelch
The VOLume and SQuelch controls have each knob. They are independent
controls but work together to control audio output from the speaker. The
volume control sets the loudness of sound from the speaker and the squelch
control is used to mute background noise when no received signals are
present.
To properly set the VOL and SQ controls:
•
Rotate the SQ knob fully CCW.
•
Rotate the VOL knob CW until background noise is plainly heard.
•
Slowly rotate the SQ knob CW until the noise is muted (squelched).
Then adjust the control slightly more CW (approximately 1/8 turn).
Use care not to set the SQ control more CW than necessary or weak
signals may not be heard.
Some channels exhibit more background noise than others, so it may be
necessary to readjust the squelch setting when changing channels or when
scanning.
Summary of Contents for FX-400
