14
1. When the car ignition is ON, the
AdvanceMobile™ QC1 will stay
on.
2. When the ignition is turned OFF and there is no active call in progress, the
AdvanceMobile™ QC1 will turn OFF after 30 seconds.
3. The AdvanceMobile™ QC1 will remain on if an active call is in progress even if
the ignition is turned OFF.
AdvanceMobile™ QC1 Control Module LED indicators:
Steady RED
Unit not registered with the system
Steady GREEN
Unit registered with the system -‐ OK
Orange
Call in operation
Optional Accessories
Privacy Handset ( Part # AT7107A)
Diagram 14
1. To use a Privacy Handset with the AdvanceMobile™ QC1, plug the connector
on the end of the coil cord into the corresponding RJ45 receptacle on Junction
Box. See Diagram 9 above
2. To answer an incoming call, lift the handset out of the cradle and use as you
would a regular phone handset.
3. To terminate the call, replace the handset into the cradle.
4. To transfer and active call from the handset to hands-‐free mode, press and
hold down the round button on the back of the handset and replace the
handset into the cradle. Audio will be transferred to the speaker
5. If the handset is not placed in the cradle and there is no call in progress, a
beep every second will be heard through the speaker.
