8
2.2 Programmable Outputs
Relays 1 and 2 are programmed in the same way as the relays on the MXP-008 8-way relay card.
Shop Interface Output
PC Program Output Purpose
Settings required at PC
RELAY 1
Panel O/C-1
Programmable Output
Set Text & Output Group
RELAY 2
Panel O/C-2
Programmable Output
Set Text & Output Group
The sample PC program below shows these relays allocated to output Groups 190 & 191 respectively (these
group numbers are arbitrary
– any output group can be used). For ease of recognition, the text for each input
has also been changed to indicate that it is part of the Shop Interface
– again any text as appropriate for the
application can be used.
Please take care to program Panel outputs “Panel O/C-1” & “Panel O/C-2” on the PC for these outputs (the
REL-1 & REL-2 relays are those mounted on the panel baseboard!).
