Advanced ExGo Series, Manual

Page: 11 / 20

www.advancedco.com
11
2.3 Level 1 Menu Functions
The following table gives a list of the Level 1 Menu Functions and a brief description for each function.
Menu Option Sub Menu /
Item Comments / Description
VIEW FAULTS View any current fault conditions recorded.
DISABLES View any current disablement conditions.
WARNINGS View any current extinguishant warnings conditions.
LOG View the history log.
SW VERSIONS View the software version installed in the extinguishant control panel
and in remote status indicator panels.
LED TEST -- Disable Zone, Sounder, Input and Output circuits and disable
functions. Enable any current disablement conditions
EXIT -- Return to the normal status display.
2.3.1 Navigating through Level 1 Menus
Press the

button to select the Menu Options
When the menu is displayed, use the

buttons to highlight the required menu
option and then press the

button to select it.
Press the

button from within a menu option to return to the previous menu.
The display will revert to the status mode display after 60 seconds on no activity
(15 seconds in a fire alarm condition). Press the

button again to return to the menu option.
2.3.2 View
On selection, the current status of any Faults, Disablements and Warnings along with the history Log can be
shown.
[View Menu]
FAULTS .
DISABLES
WARNINGS
SW VERSIONS
EXIT
Press the

buttons to scroll through the list and press the

button to select the required view option.
[Fault Status]
Nothing to Report
If there are no conditions present, the
display will show “Nothing to
Report”.
2.3.2.1 Faults
[Fault Status]
1 of 3
DETECTION ZONE 1 .
>SHORT CIRCUIT .
DETECTION ZONE 2
>OPEN CIRCUIT
If there are fault conditions present, the display will show the
number of conditions and a list of the fault conditions.
Press the

buttons to scroll through the list of faults.
Press the

button to return to the previous menu.
[Level 1 Menu]
VIEW .
LED TEST
EXIT