59
CAUTION! RISK OF DANGER TO THE ENVIRONMENT
Do not dispose of starters with regular waste. Always dispose of starters in
compliance wth applicable environmental regulations and standards.
Assembly of starter
Set in the new starter (3).
Turn the starter clockwise by 90° into the lampholder (4).
Replacement of sunbed acrylic
Installation of new sunbed acrylic
The two sash locks must be open.
To open: turn clockwise by 90°.
Get the new sunbed acrylic into a position suitable for installation.
Put the sunbed acrylic into the groove along the rear sunbed profile.
Lower the sunbed acrylic along the groove on the front profile.
– At the footend the sunbed acrylic is slightly lifted up by the
microswitch.
