36
Assembly of top canopy cover
The top canopy covers sit across the whole front length in a groove of the
front top profile. Two holding pins keep the top canopy cover in the groove.
At the rear side, the top canopy cover is supported by the top canopy frame
and fastened with 6 screws.
NOTICE:
Two (2) persons are necessary to assemble the top canopy
cover.
Lift the top canopy cover at the headend and footend onto the top.
- Tilt the top canopy cover forward.
- Let the top canopy cover at the front edge into the groove at
the top profile.
NOTICE:
Take care that the top canopy cover is let vertically into the
groove.
To the rear side, let the top canopy rest on the top canopy frame.
- Adjust the top canopy cover to insert the mounting screws.
Fasten top canopy cover
- at the rear side with screws
- at the front side by locking the fastening latches.
Assembly of front cover
At the bottom, the front cover plate is fixed with two hook plates into slots
at the right and left bench supports. On the top it is fixed with two screws to
the sunbed bench.
NOTICE:
Two (2) persons are necessary to assemble the front cover.
Take the front cover and put it in a center position in front of the sunbed
bench.
Put the front cover into position at the right and left bench supports.
- Let the hook plates into the slots.
Push in the hooks until you reach the stop position.
In the top, tilt the front cover towards the sunbed bench.
- Adjust the front cover and tighten.