manualshive.com logo in svg

Advanced Technology Video MNLDVR4, User Manual, Page: 78 / 94

Share
Download
Advanced Technology Video MNLDVR4 User Manual Download Page 78

User’s Manual 

 

70

 

 

 

Selecting   located at the bottom displays the Search menu. 

 

 

y

 

Go to:

  Displays the first or last recorded image, or searches by date and time 

(see the previous 

Searching Video – Go To 

section of this chapter for more 

details). 

y

 

Clip-Copy:

  Clips a video segment and saves it (see the following 

Clip Copy

 

section for more details). 

y

 

Zoom:

  Zooms the current playback image. 

y

 

Enable De-Interlace:

  Turns the de-interlace filters on. 

y

 

Slow Play:

  Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).

 

 

NOTE:  Playing video at low speed will be supported for video recorded 10 images or more 
per second. 

 

The individual playback controls at the bottom perform the following functions as described below: 

 

  Go to the previous image 

  Play/Pause

 

  Go to the next image 

  Fast backward play

  Fast forward play

 

 

Selecting   in the top-left corner exits the Record Table Search screen.

 

 

Motion Search

 

 

 

Highlighting 

Close

 and pressing the 

 button will extract the video associated with the Motion 

event and display the first image of the event.  Pressing the 

 button will start playing the “event” 

video segment.  Pressing 

SEARCH

 button returns to live monitoring. 

 

You can also narrow your event search by selecting the 

Option…

 button and setting up the new 

search condition. 

 

Days with recorded video display on the calendar with white 
numbers.  You can highlight the days with recorded video by 
using the arrow buttons.  Once you have highlighted a day, 
press the   (Play/Pause) button to select it.  The first recorded 
image of the selected date will pause on the screen.  Once 
you have selected the date you want to search, review the 
surrounding video by using the playback controls located at 
the bottom of the Record Table Search screen. 

 

Figure 69  Motion Search screen. 

The 

Motion Search…

 can be selected from the 

Search menu while the DVR displays the camera 
full screen.  The 

Motion Search

 screen displays 

a list of motion events.  Use the arrow buttons 
to highlight the event for which you would like 
to see video and press the   (Play/Pause) button 
to display the video associated with the selected 
event on the small search screen.

 

Summary of Contents for MNLDVR4































































































Reviews:

No comments