4- & 8-Channel Digital Video Recorder
43
Pre
-Event
Highlight
Pre-Event
in the Record menu and press the button, and the
Pre-Event
setup screen
appears. If you do not have Event set up in the Record Schedule, a message will display alerting
you to this fact.
You can set the amount of time to record prior to the event by adjusting the
Dwell
. You can set
the
Dwell
from 5 seconds to 30 minutes. The longer the dwell set, the fewer maximum ips can
be set.
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings
and follows the time settings.
Event Setup
Figure 46 Event menu.
Alarm
-In
Highlight
Alarm-In
in the Event menu and press the button. The
Alarm-In
setup screen appears.
Figure 45 Pre-Event setup screen.
When the DVR is in the Event Record mode it
is possible to have it record images before the
event occurs. The
Pre-Event
screen allows you
to define how to handle pre-event recording.
You can turn individual cameras On or Off for
pre-event recording. The image speed can be
set from 0.10 to 30.00 ips (25.00 ips PAL), and
image quality can be selectable from
Very High,
High
,
Standard
and
Basic
.