manualshive.com logo in svg

Advanced Technology Video MNLDVR4, User Manual, Page: 59 / 94

Share
Download
Advanced Technology Video MNLDVR4 User Manual Download Page 59

4- & 8-Channel Digital Video Recorder 

 

51

 
 

 

 

Highlight 

Setup…

, and press the   button.  Use the ATM or POS manufacturer’s recommended 

settings when configuring the RS232, RS485, USB-Serial or LAN ports. 

 

Highlight the box beside 

Text-In Product

, and press the   button.  Select your device from the list. 

 

NOTE:  The following description is for a 

Generic Text Device

.  The screen changes for 

different types of text input devices, and there will be different parameter boxes for you to 
enter information. 

 

Highlight the box beside 

Transaction Start

, and press the   button.  Use the virtual keyboard 

to enter the Transaction Start string.  Refer to the device manufacturer’s documentation for the 
text string that the device first sends when a transaction starts. 

 

If you want the DVR to react to any character sent from the text input device, you will want to 
turn On 

Any Character.

  Highlight 

Any Character

, and press the   button to toggle between 

On and Off. 

 

NOTE:  If 

Any Character

 is turned On, you will not be able to enter any text in the 

Transaction

 

Start

 box.

 

 

Highlight the box beside 

Transaction End

, and press the   button.  Use the virtual keyboard to 

enter the Transaction End string.  Refer to the device manufacturer’s documentation for the text 
string that the device sends when a transaction ends. 

 

 

Figure 55  Text-In Settings setup screen. 

The DVR can be set to react to text input from 
devices such as ATMs (Automated Teller 
Machines) and POS (Point of Sale; i.e., cash 
registers).  This screen allows you to configure 
the DVR for each text-in device. 

 

Highlight the box under the 

Setup

 heading, and 

press the   button.  Selecting the 

Setup

 

heading changes all the parameters excluding 
Port settings of all the text input channels. 

 

NOTE:  The system performance might be 
affected when a large quantity of text inputs 
are detected from several channels at the 
same time. 

 

Figure 56  Text-In Device setup screen. 

Highlight the box beside 

Port

, and press the   

button.  Select from None, RS232, RS485, USB- 
Serial (1~8) and LAN (1~8). 

 

NOTE:  If you have set the Port as 

None

, you 

will not be able to make any changes to the 
screen.

 

 

NOTE:  When using the USB to serial text-in 
device, do NOT remove the USB cable from 
the port while the system is running.

 

Summary of Contents for MNLDVR4































































































Reviews:

No comments