manualshive.com logo in svg

Advanced Technology Video MNLDVR4, User Manual, Page: 29 / 94

Share
Download
Advanced Technology Video MNLDVR4 User Manual Download Page 29

4- & 8-Channel Digital Video Recorder 

 

21

 
 

y

  Covert Camera Setup – 

The user can establish all Covert Camera settings on a local system or a PC 

running ATVision.

 

y

  Record Setup – 

The user can establish all Record settings on a local system or a PC running ATVision.

 

 

To add a User, highlight the 

+ User…

 box and press the 

 button.  

A virtual keyboard appears allowing you to enter the User Name.  
Enter the name and assign the User to a Group and password.  You 
can use camera buttons 1 to 8 on the front panel to assign the 
password.  The password can be up to 8 digits.  You will be asked 
to confirm the password. 

 

NOTE:  In addition to using the front panel buttons or the infrared remote control, you can 
use the virtual keyboard to assign the password.  To display the virtual keyboard click the 

 button using the mouse. 

 

Highlighting the box beside 

Auto Login

 allows you to select a User to be automatically logged 

in when the DVR is powered up.  It can also be set to never automatically login a user. 

 

Highlighting the box beside 

Auto Logout

 allows you to select from a list of times that the user 

will be automatically logged out.  The options are: Never, 1 min., 3 min., 5 min., 10 min., 15 min., 
20 min., 30 min. and 1 hr. 

 

Wizard

 

 

Highlight 

Wizard 

and press the   button.  The 

Setup wizard 

screen appears. 

 

The Setup wizard 

guides you through configuring the system for basic operation. 

 

NOTE:  This 

Setup wizard

 screen can only be accessed when logged on as the 

admin

 user. 

 

 

Figure 16  Setup wizard screen. 

Select either 

Quick wizard

 or 

Network wizard

 

and select the 

Next

 button to start the selected 

setup wizard. 

 

NOTE:  Selecting the 

Cancel

 button 

throughout the screens exits the Setup 
Wizard without saving your changes and 
returns to the main setup screen. 

Summary of Contents for MNLDVR4































































































Reviews:

No comments