3 |
P a g e
5.
PREPARATION OF JOB SITE, OPENING PACKAGES
********** DO NOT USE A KNIFE OR UNPROTECTED BLADE TO OPEN PACKAGES **********
Each Mystic unit comes packaged in two sturdy cardboard tubes with metal caps screwed on to the ends
of the tubes.
If you are not using saw horses, spread blankets on floor or lawn to protect the painted metal frames
from scratches and the screen fabric from damage.
Using a power tool, remove the screws from one metal end-cap on each tube.
Using a sturdy screwdriver or other flat tool, remove the metal end-cap from the tubes.
Slide the contents of each tube out of the tube and carefully lay it on the saw horses or protective
blanket. Carefully remove the foam covering using scissors or by hand.
Remove the canister cover by undoing the screw that secures the cover to each end of the canister. Save
the screws in a safe location.
Remove the contents inside the canister. Depending on the dimensions of the unit, the canister will
either contain (a) the screen panel rolled up on the motorized metal tube or (b) the assembled side rails,
bottom weight bar, and hardware bag. Save any non-packaging items in a safe location.
Using a hand screwdriver, unscrew the inner rail from the outer rail of the 2 side rail assemblies. Save
the screws in a safe location.
Your package contents should be:
-
1 L-Shaped Canister back assembly with end-caps and mounting brackets installed; and
-
1 Canister front - curved; and
-
1 Screen panel assembly: screen panel rolled up on metal tube; motor on one end; idler
spring at other end; side zipper cutout on bottom right for weight bar installation; 3 zipper
teeth cut off the bottom zipper to allow for proper motion of screen panel; and
-
1 bottom weight bar assembly; plastic end-caps on each end of bottom bar; and
-
2 Inner side rails with plastic entry guide installed at the top; and
-
2 Outer side rails (with predrilled access holes if unit is to be surface mounted); and
-
1 Hardware bag containing:
Remote control(s)
Extra hood screw (2 pieces)
Yellow limit adjustment tool
Color Matched Hole Caps (if surface
mount)
Inner Side rail screws
Mystic Installation Instructions
Electrical plug
Mystic Motor & Remote Programming
Instructions
