8
Remote Smart Switch Option
If you purchased the Remote Smart
Switching Option for the Smart Bus
then you can enjoy turning you model
ON and OFF via the remote key FOB.
This is great for a true scale model ap-
pearance and will be a great conversa-
tion piece at the field.
To operate the Smart Bus with the Remote Smart Switch simply connect the Remote receiver module to
the switch input of the Smart Bus. And you are ready to go.
Please Note: When you fist connect the remote smart switch to the Smart Bus the Smart Bus will stay
switched ON. This is normal and part of the fail safe design.
To switch the Smart Bus ON or OFF do the following:
Press button “A” and within 2 seconds press button “B”. If the Smart Bus is in the ON position it will
turn OFF. If the Smart Bus is in the OFF position it will turn on.
Pressing button “A” and “B” too fast will do nothing. Also pressing button “A” and button “B” too slow
will do nothing. These are safety features so you cannot accidentally switch Smart Bus ON or OFF.
Please also note. The remote switch is a receiver and while connected it draws several milliamps of
power from your batteries. This is minimal in normal operation over a weekend BUT to save the receiv-
er batteries from being flattened over a few weeks you SHOULD ALWAYS disconnect your batteries
from the Smart Bus after a weekly flying session.