10
Power Setup Screen
Return
Takes you back to the previous screen.
RES
-
mA
Resets total mA used. Please ensure both packs
are
FULLY
charged before you reset.
RES
-
FLT
Resets flight counter and timer to zero. Use this
feature mostly when installing in a new airframe
or before the maiden flight.
Bat Capacity mA
Shows the capacity of the batteries you are us-
ing. We will go through how to set this in the
First Time Setup section on page 10.
System Screen
Return
Takes you back to the previous screen.
Calibrate
Takes you to Screen calibration. For more
information see page 12.
Credit
Shows credits screen.
Servo Voltage Selector
Sets the regulator output voltage (servo voltage).
Please make sure your battery packs are fully charged before making the servo output volt-
age selection.
The Smart Bus will read the battery voltage and will make available only the
voltages that will work for your selected battery type. All other choices will be greyed out and
are not selectable.
For example: if you are using Lion 2S packs then the choice will be 6.0v or 7.2v.
Servo voltage choices when using different battery types:
LiFe 2S packs = 6.0v
Lion2S and Lipo 2S = 6.0v or 7.2v
LiFe 3S, Lion 3S or Lipo 3S = 8.4v (only available with Extreme 3S model).
