POWERL MANUAL
Page 5
11
Scanning window
RFID antenna (option)
Protection glass for the barcode and RFID reader. To have the
best reading performance, keep the glass clean and free of
scratches.
Antenna for RFID reader/writer
12
Clip holder (accessories)
Holder to fix the shirt clip, belt clip or neck belt (accessories)
13
Int. Li-Ion battery
Rechargeable Li-Ion battery 1500mAh
14
Configuration Mode
Alternative configuration mode
Follow the steps below to set the configuration mode
1.
Switch off the device
2.
Press and hold key 4 and 5 until a beep sound
appears (this may take a few seconds)
3.
Connect the device to a computer via USB
4.
The device will be mounted as a removable drive
“SCANNDY”
5.
Open the file “config.ini” or use the Universal
Configurator to modify the settings
6.
Press button 3 (Trigger) until a beep sound appears
The device restarts with the new settings
CHARGING THE BATTERY
Before the first operation, the main battery should be fully charged by using
the included power adapter or through the USB interface of the computer.
As long as the battery is charging the red LED (3) will light solid red. After the
battery is fully charged the red LED (3) turns off.
