POWERL MANUAL
Page 4
No. Description
Function
1
Green LED
Lights up green when ECCO+ is turned ON.
When the battery level is empty, it flashes every 2 sec
(Further function can be user defined with the programming
interface)
2
Yellow LED
Lights up yellow if a barcode or RFID tag was read
successfully.
Is flashing yellow (500ms) when connected to USB
(Further function can be user defined with the programming
interface)
3
Red LED
Lights up red if connected to a battery charger (USB or power
adapter)
Red = Battery charging
Off = Battery fully charged
4
Blue LED
Lights up blue when ECCO+ is connected to Bluetooth
Is flashing fast (500ms) while Wi-Fi is associated
Is flashing blue (3 sec.) when Wi-Fi is connected
(Further function can be user defined with the programming
interface)
5
Key 1 (Trigger button)
Triggers the barcode and/or the RFID reader
(Further function can be user defined by Master Setup or with
the programming interface)
6
Key 2 (custom)
(This function can be configured by using Master Setup or
with the programming interface)
7
Key 3 (Custom)
(This function can be configured by using Master Setup or with
the programming interface)
8
Key 4 (Custom)
Power ON/OFF button
(This function can be configured by using Master Setup or with
the programming interface)
Power key to turn the unit ON. Pressing this key for 3 sec.
turns the unit OFF
9
USB protection clip
Mini-USB Interface
Rubber clip to protect the Mini USB port
Main communication and battery charging interface
10
RESET
Press and hold the keys 5+6+7+8 for 5 seconds to reset the
device.
!!! Please note!!!
By reset the device loses its
timestamp. Before you continue to use it, you must
synchronize the time settings by connecting the device again
with the Master Setup.The time thereby automatically
synchronized with the system time of your PC. Specific
configuration settings and data will not be lost by the reset.
